BESMarine is proud to present its new products, unique in the world.

The aerosol fire extinguishing BM02-12-40 control panel is unique in the market and is the only one to be Lloyd’s Register certified.

For smaller vessels (15 tons or less), the BM02-can, approved in Canada, is the best option on the market.

Find out why our panels are ideal to control potassium salt generators.

;
Front photo of the BM02-12-40 aerosol extinguishing main panel
Photo of the main aerosol extinguishing panel BM02-12-40
Side photo of the BM02-12-40 aerosol extinguishing main panel
Side photo 2 of the main aerosol extinguishing panel BM02-12-40
Photo of the BM02-12-40 aerosol extinguishing remote panel

Functions of the BM02-12-40 model

  • Controls up to 16 potassium salt generators and a maximum of 40 generators with an expansion card
  • 2 operating modes: “Sequential” or “Burst”
  • Manual trigger mode (following detection) or (without detection)
  • 2 supervised 24 vdc power supplies
  • 4 x 24vdc FXB (Fire Extinguishing Bank) outputs supervised in real time (continuous operation and cabling fault verification)
  • 1 supervised siren output
  • 2 supervised strobe outputs
  • 1 supervised fire detection loop (heat / smoke)
  • Supervised CAN communication (display panel)
  • NO-NC relay output to automatically deactivate and activate the ventilation of the protected compartment.
  • NO-NC relay outputs to indicate (fire alarm and extinguishing agent released)
  • Ability to add up to 10 additional display panels as needed
  • The display panel (s) can be installed up to 100 meters (328 feet) from the main panel
  • The silent trigger and alarm buttons are supervised and can be deported
  • The light intensity of the display panel is automatically adjusted using a photocell
  • Following a trigger, the panel keeps in memory the FXB (Fire Extinguishing Bank) which has been released (by EPROM memory)
  • Flawless operating autonomy of the control panel following a communication problem with the display consoles
  • Ease of installation

Technician remote control

  • Reset the system memory after releasing the FXB (Fire Extinguishing Bank) outputs
  • Adjust the ventilation shutdown times before releasing the extinguishing agents
Technician remote
Photo of the BM02CAN aerosol extinguishing main panel

Functions of the BM02-can model

  • Controls up to 12 potassium salt generators
  • 2 operating modes: “Sequential” or “Burst”
  • Manual trigger mode (following detection) or (without detection)
  • 2 supervised 24 vdc power supplies
  • 4 x 24vdc FXB (Fire Extinguishing Bank) outputs supervised in real time
  • 1 supervised siren output
  • 2 supervised strobe outputs
  • 1 supervised fire detection loop (heat / smoke)
  • Supervised integrated display panel
  • NO-NC relay output to automatically deactivate and activate the ventilation of the protected compartment
  • NO-NC relay outputs to indicate (fire alarm and extinguishing agent released)
  • The silent trigger and alarm buttons are supervised in time and can be deported
  • The light intensity of the display panel is automatically adjusted using a photocell
  • Following a trigger, the panel keeps in memory the FXB (Fire Extinguishing Bank) which has been released (by EPROM memory)
  • Flawless operating autonomy of the control panel following a communication problem with the display console
  • Ease of installation

For more information, feel free to contact us

BESMarine inc. | Marine electricity specialist

428, rue Courcival
Québec (Québec)
G1C 7G1 Canada

Phone number: +1 418 661-0581
Fax number: +1 418 667-9598
Mobile phone number: +1 581 997-3720
info@besmarine.com

13 + 9 =